EFI Fiery Configuration And Setup

CONFIGURING WEBTOOLS 37
CONFIGURING WEBTOOLS
WebTools allow you to manage your Fiery Controller remotely from the Internet or from
your company’s intranet. The Fiery Controller has its own home page, from which you can
select the WebTool that you want to use.
For information about using WebTools, see Utilities. Also, for many of the WebTools, you can
consult the Help.
Configuring the Fiery Controller and computers for WebTools
WebTools provide access to many Fiery Controller functions via the Internet (or intranet),
providing additional flexibility in remote management. With WebTools enabled, you can
access them from a network computer.
WebTools is enabled by default.
TO ENABLE ACCESS TO WEBTOOLS, ENSURE THAT THE FOLLOWING ITEMS ARE ENABLED
• A valid, unique IP address, subnet mask, and gateway address for the Fiery Controller.
Print a Configuration page to acquire the Fiery Controller IP address (see page 47).
• Web Services is enabled by default.
TO SET UP A COMPUTER TO ACCESS WEBTOOLS
1 Enable TCP/IP networking on the user computer.
2 Assign the computer a valid, unique IP address, subnet mask, and gateway address,
if required.
3 Install an Internet browser that supports the Java language and frames.
Make sure that Java is enabled. For more information about supported browsers and
WebTools requirements, see Welcome.
TO ACCESS WEBTOOLS
1 Start your Internet browser and type the IP address or DNS name of the Fiery Controller.
The Fiery Controller home page appears.
2 Click the tab corresponding to the WebTool that you want to use.

EFI Fiery Specifications

General

Brand	EFI
Model	Fiery
Category	Server
Language	English