EFI Fiery Configuration And Setup

ADMINISTERING THE FIERY CONTROLLER 40
Clearing the Fiery Controller
The Clear Server command allows you to clear all queued print jobs from the Fiery Controller
Print, Hold, and Printed queues. Jobs can also be deleted, either individually or as a group,
using Command WorkStation. Clear Server also clears all jobs archived on the
Fiery Controller hard disk, the index of archived jobs, and all FreeForm masters.
TO CLEAR THE FIERY CONTROLLER FROM COMMAND WORKSTATION
• In Command WorkStation, choose Clear Server from the Server menu.
For more information, see Command WorkStation Help.
Back up your original data on your own media at the same time that you store and save data
on the Fiery Controller hard disk. Never damage or reset the Fiery Controller hard disk, and
do not turn off the system while accessing the hard disk. For instructions on how to turn on
and turn off the Fiery Controller, see page 48.
If the Fiery Controller hard disk or system software experience technical difficulties,
data stored and saved on the Fiery Controller hard disk may be irretrievably lost. If problems
with the hard disk occur, extended storage of the following data cannot be assured:
•Third-party fonts
• Archived jobs
• Print jobs
• Color profiles, including profiles downloaded or edited with Spot-On
• Job notes and instructions
• Jobs edited with Impose
• Variable data documents
• E-mail Service Address Book
• Fiery Controller configuration information (list of all the settings in effect for the current
Setup)

EFI Fiery Specifications

General

Brand	EFI
Model	Fiery
Category	Server
Language	English