2. Unplug the AC adapter, and then disconnect the USB cable that is connected to the computer from the Flatbed
Scanner Dock.
3.
Do not subject the Flatbed Scanner Dock to vibrations and keep it level while carrying.
Transporting the Flatbed Scanner Dock
Make sure you have the Setup guide with you before you begin the following procedure.
1. Press the
button to turn o the sheet feed scanner.
Note:
ere is no power button on the atbed scanner.
2.
Perform the setup procedure by reversing the procedure described in the setup guide supplied with the Flatbed
Scanner Dock to separate the sheet feed scanner, the atbed scanner, and the Flatbed Scanner Dock.
3.
Attach the packing materials that came with the Flatbed Scanner Dock, and then repack it in its original box
or a similar box that ts the Flatbed Scanner Dock snugly.
Troubleshooting for the Flatbed Scanner Dock
Uneven Colors, Dirt, Spots, and so on Appear when Scanning from
the Scanner Glass
❏ Clean the scanner glass.
❏ Remove any trash or dirt that adheres to the original.
❏ Do not press with too much force on the original or the document cover. If you press with too much force,
blurring, smudges, and spots may occur.
User's Guide
Using the Flatbed Scanner Dock
100
To Next Page
Loading...
Need help?
General
