Epson DS-970 User Manual

❏ Perforated originals
❏ Original with labels or stickers
❏ Carbon-less paper
❏ Curled originals
❏ Coated paper
c
Important:
Carbon-less paper contains chemical substances that may harm the rollers. If you scan carbon-less paper, clean the
pickup roller and the separation roller regularly. Also, scanning carbon-less paper may shorten the life cycle of the
rollers faster than scanning plain paper.
Note:
❏ Crinkled originals may scan better if you slow down the feeding speed during scanning or smooth out the crinkles before
loading.
❏ To scan delicate originals or originals that are easily crinkled, use the Carrier Sheet (sold separately).
❏ To scan originals that are incorrectly detected as double feeds, set the DFDS Function to On on the control panel before
you resume scanning, or select O in Detect Double Feed on the Main Settings tab in the Epson Scan 2 window. When
you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan
Settings screen.
❏ Labels or stickers must be
rmly
stuck to the originals with no glue protruding.
❏ Try to
atten
the curled originals before scanning.
Related Information
&
“Scanner Basics” on page 11
& “Maintenance” on page 102
Types of Originals that Must Not be Scanned
e
following types of originals must not be scanned.
❏ Photos
❏ Booklets
❏ Non-paper original (such as clear
les,
fabric, and metal foil)
❏ Originals with staples or paper clips
❏ Originals with glue attached
❏ Ripped originals
❏ Heavily wrinkled or curled originals
❏ Transparent originals such as OHP
lm
❏ Originals with carbon paper on the back
❏ Originals with wet ink
❏ Originals with sticky notes attached
User's Guide
Specications of Originals and Placing Originals
25

Epson DS-970 Specifications

General

Brand	Epson
Model	DS-970
Category	Scanner
Language	English