Note:
❏ You can scan long paper in the following resolutions.
· 393.8 to 1346.2 mm (15.5 to 53 in.) in length: 600 dpi or less
· 1346.3 to 5,461.0 mm (53 to 215 in.) in length: 300 dpi or less
· 5,461.1 to 6,096.0 mm (215 to 240 in.) in length: 200 dpi or less
❏ You need to specify the paper size in the Epson Scan 2 window. When you are using Document Capture Pro, you can
open the window by pressing the Detailed Settings button on the Scan Settings screen.
ere
are three ways to specify the paper size in the Epson Scan 2 window.
If the paper length is 3,048 mm (120 inches) or less, you can select Auto Detect (Long Paper) to detect the size
automatically.
If the paper length is more than 3,048 mm (120 inches), you need to select Customize and enter the size of the paper.
If the paper length is 5,461 mm (215 inches) or less, you can use Detect paper length instead of entering the paper
height. If the paper is longer than 5,461 mm (215 inches), you need to enter the width and height of the paper.
❏ Support long paper at the input side so that it does not drop out of the ADF, and on the output side so that the
ejected paper does not fall from the output tray.
Related Information
& “Required Settings for Special Originals in Epson Scan 2” on page 71
Plastic Cards
Specications of Plastic Cards
e specication of plastic card you can load into the scanner.
User's Guide
Specications of Originals and Placing Originals
33
To Next Page
Loading...
Need help?
General
