4. Slide the edge guides to t the edge of the plastic cards.
Note:
To scan plastic cards, set the appropriate setting in the Epson Scan 2 window. When you are using Document Capture
Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.
Select Plastic Card (Landscape) in Document Size or select O in Detect Double Feed on the Main Settings tab in
Epson Scan 2. See the Epson Scan 2 help for details.
If Detect Double Feed in the Epson Scan 2 window is enabled and a double feed error occurs, remove the card from the
ADF, reload it, press the
d
button, and then select DFDS Function (Double Feed Detection Skip function) on the
control panel to set it to On.
is
disables Detect Double Feed for the next scan, and you can scan again.
e
DFDS
Function only disables Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2” on page 71
Laminated Cards
Specications of Laminated Cards
e specication of laminated cards you can load into the scanner.
Size Thickness Loading Capacity
120.0×150.0 mm (4.7×5.9 in.) or less 0.8 mm (0.03 in.) or less 1 card
User's Guide
Specications of Originals and Placing Originals
36
To Next Page
Loading...
Need help?
General
