Epson DS-970 User Manual

Note:
You can avoid cropping by moving the document about 2.5 mm (0.1 inch) away from the top and side edges indicated
by
A
and
B
in the following
gure.
4. Close the document cover gently so that your original does not move.
Note:
❏ Always keep the scanner glass clean.
❏ Do not leave originals on the scanner glass for an extended period of time as they may stick.
5. Start Document Capture Pro (Windows), Document Capture (Mac OS), or Epson Scan 2.
6. Select Scanner Glass from the Document Source list on the scan setting screen.
7. Set the other items as necessary and then start scanning.
Notes on Using the Flatbed Scanner Dock
Place the Flatbed Scanner Dock on a horizontal and stable surface.
Notes on Scanning from the ADF
Depending on the length of the originals, operations for the input tray, the output tray, and the stopper vary when
scanning from the ADF using the Flatbed Scanner Dock. Do one of the following.
Note:
See the explanation for placing originals regarding other operations except for the input tray, the output tray, and the stopper.
Originals shorter than A5 (210 mm)
Slide out the output tray, extend the output tray extension, and then raise the stopper.
User's Guide
Using the Flatbed Scanner Dock
95

Epson DS-970 Specifications

General

Brand	Epson
Model	DS-970
Category	Scanner
Language	English