EasyManuals Logo
Home>Epson>Scanner>DS-970

Epson DS-970 User Manual

Epson DS-970
139 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
Note:
You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times.
If you cannot nd an appropriate size for the original you want to scan in the Document Size list, select Auto
Detect.
When using Epson Scan 2, you can also select Customize to create a custom document size.
When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically
scanned by applying Paper Skew in the Correct Document Skew setting.
Do not leave photos inside the Carrier Sheet for a long time.
Only use the Carrier Sheet designed for your scanner.
e
Carrier Sheet is automatically recognized by the scanner
by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information
&
“Carrier Sheet Codes” on page 19
& “Required Settings for Special Originals in Epson Scan 2” on page 71
Envelopes
Specications of Envelopes
e specication of envelopes you can load into the scanner.
Size Measurement Thickness Loading Capacity
C6 114×162 mm (4.49×6.38 in.)
(standard size)
0.38 mm (0.015 in.) or less 10 envelopes
DL 110×220 mm (4.33×8.66 in.)
(standard size)
User's Guide
Specications of Originals and Placing Originals
47

Table of Contents

Other manuals for Epson DS-970

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson DS-970 and is the answer not in the manual?

Epson DS-970 Specifications

General IconGeneral
BrandEpson
ModelDS-970
CategoryScanner
LanguageEnglish

Related product manuals