Projector Network Settings - Network Menu
187
Setting Options Description
Channel 1ch
6ch
11ch
In Quick connection mode, selects the
frequency band (channel) used by the
wireless LAN.
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
SSID Display On
Off
Select whether to display the SSID on the
network standby screen and Home
screen.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen and
Home screen.
Type of security
When connecting to a wireless network in Advanced connection mode, it is
strongly recommended that you set security.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
a
For setting details, follow the instructions from your network
administrator.
Network Menu - Wired LAN Menu
Settings on the Wired LAN menu let you select the wired LAN settings.
s Network > Network Configuration > Wired LAN
Setting Options Description
IP Settings DHCP
IP Address
Subnet Mask
Gateway Address
DHCP: set to On if your network assigns
addresses automatically; set to Off to
manually enter the network's IP
Address, Subnet Mask, and Gateway
Address using 0 to 255 for each address
field.
Do not use these addresses: 0.0.0.0,
127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number
from 0 to 255) for IP Address and
Gateway Address and 0.0.0.0 and
255.255.255.255 for Subnet Mask.
IP Address Display On
Off
Select whether to display the IP address
on the network standby screen.