Projector Setup Settings - ECO Menu
191
Settings on the ECO menu let you customize projector functions to save
power.
When you select a power-saving setting, a leaf icon appears next to the menu
item.
Setting Options Description
Power
Consumption
Selects the brightness mode of the
projector lamp. You cannot select
settings when you use your projector at
high altitude or in locations subject to
high temperatures.
This item is disabled when Multi-
Projection is set to On.
s Extended > Multi-Projection >
Multi-Projection
Auto Auto: sets the projector to sense the
optimum lamp brightness needed and
adjusts the lamp's brightness accordingly.
This item is enabled only when you
install the projector upside-down.
Normal Normal: sets maximum lamp brightness.
Setting Options Description
ECO ECO: reduces lamp brightness and fan
noise, and saves power and lamp life.
ECO2 * ECO2: reduces the fan noise to less than
ECO.
Light Optimizer On
Off
When set to On, the lamp brightness is
adjusted according to the projected
image. This helps to reduce the power
consumption by lowering the lamp
brightness according to the scene being
projected.
The setting is stored for each Color
Mode.
This item is enabled when:
• Power Consumption is set to Normal
or Auto.
• Auto Iris is set to Off.
s Image > Auto Iris
• Multi-Projection is set to Off.
s Extended > Multi-Projection >
Multi-Projection
Sleep Mode On
Off
Automatically turns off the projector
after an interval of inactivity (when On).
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.
A/V Mute Timer On
Off
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
To Next Page
Loading...
Need help?
General
