Epson EB-685W User Manual

Projector Network Settings - Network Menu
189
Setting Options Description
Notified IP Address IP address Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Network Menu - Others Menu
Settings on the Others menu let you select other network settings.
s Network > Network Configuration > Others
Setting Options Description
Priority Gateway Wired LAN
Wireless LAN
You can set the priority gateway.
Setting Options Description
AMX Device
Discovery
On
Off
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Crestron
RoomView
On
Off
Set to On only when monitoring or
controlling the projector over the
network using Crestron RoomView.
Enabling Crestron RoomView disables
the Epson Message Broadcasting feature
in the EasyMP Monitor software.
Control4 SDDP On
Off
Set to On to allow device information to
be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Message
Broadcasting
On
Off
Set to On to enable EPSON Message
Broadcasting feature.
You can download Message Broadcasting
and its Operation Guide from the
following Web site.
http://www.epson.com/
Network Menu - Reset Menu
Settings on the Reset menu let you reset all of the network settings.

Epson EB-685W Specifications

General

Brand	Epson
Model	EB-685W
Category	Projector
Language	English