Image Shape
58
a
• If you see this screen, you cannot adjust the shape any further
in the direction indicated by the gray triangle.
h
Repeat steps 6 and 7 as needed to adjust any remaining corners.
i
When you are finished, press [Esc].
The Geometry Correction setting is now set to Quick Corner in the
projector's Settings menu. The next time you press the keystone adjustment
buttons on the control panel, the area selection screen is displayed.
gg Related Links
• "Projector Feature Settings - Settings Menu" p.175
Correcting Image Shape with Curved Surface
You can use the projector's Arc Correction setting to adjust the shape of an
image projected on a curved or spherical surface.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
To Next Page
Loading...
Need help?
General
