Maintaining the Projector
You may need to clean the projector's lens periodically, and clean the air filter and air vents to prevent the projector from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, remote control batteries, interactive pen batteries, and interactive pen tips. If any other part needs replacing,
contact Epson or an authorized Epson servicer.
Warning
Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous
electrical voltages in the projector can injure you severely.
gg Related Links
• "Cleaning the Projection Window" p.200
• "Cleaning the Obstacle Sensor" p.201
• "Cleaning the Projector Case" p.202
• "Air Filter and Vent Maintenance" p.203
• "Projector Lamp Maintenance" p.207
• "Replacing the Remote Control Batteries" p.212
• "Replacing the Interactive Pen Battery" p.213
• "Replacing the Interactive Pen Tip" p.214
To Next Page
Loading...
Need help?
General
