Projector Connections
35
b
Locate the appropriate cable to connect your external speakers, such as
a stereo mini-jack-to-pin-jack cable, or another type of cable or adapter.
c
Connect one end of the cable to your external speakers as necessary.
d
Connect the stereo mini-jack end of the cable to your projector's Audio
Out port.
Connecting a Microphone
You can connect a microphone to the projector's Mic port to provide audio
support during presentations.
If you want to output audio from a microphone when the projector is turned
off, you need to do the following:
• Select Communication On as the Standby Mode setting in the projector's
ECO menu.
• Select Always On as the A/V Output setting in the projector's Extended
menu.
a
• Plug-in-power is not supported.
• Adjust Mic Input Level if the microphone audio is difficult to hear,
or if it is too loud resulting in a crackling sound.
s Settings > Mic Input Level
a
Connect the microphone cable to the projector's Mic port.
b
Turn on the microphone, if necessary.
Connecting Multiple Projectors of the Same Model
If you use the interactive features of multiple projectors of the same model in
the same room, you need to synchronize the projectors. To do this, connect
the optional remote control cable set to the SYNC port on each projector.
To Next Page
Loading...
Need help?
General
