Preparing Before Using Interactive Features
85
The laser radiates from the laser diffusion ports on rear of the Touch Unit:
Note the following important points when performing touch operations.
Warning
• Never open any cases on the projector or the Touch Unit. Never attempt to
disassemble or modify the projector or the Touch Unit. Electrical voltages inside
the projector can cause severe injury.
• Unplug the projector from the outlet and refer all repairs to qualified service
personnel if any problems occur with the projector or the Touch Unit.
Continued use of the Touch Unit may result in fire or accidents, and can also
damage your eyes.
Laser Warning Labels
The Touch Unit is a Class 1 laser product that complies with IEC/EN60825-
1:2007.
The labels indicating the Class 1 laser product and warnings are placed in the
following places on the Touch Unit:
The labels indicate the following:
• CLASS 1 LASER PRODUCT
• WARNING: Never open any covers on this unit. Laser product inside.
• WARNING:
• CAUTION: CLASS 3B INVISIBLE LASER RADIATION WHEN OPEN
• AVOID EXPOSURE TO THE BEAM
To Next Page
Loading...
Need help?
General
