Color Mode
68
The projector offers different color modes to provide optimum brightness,
contrast, and color for a variety of viewing environments and image types.
You can select the mode designed to match your image and environment, or
experiment with the available modes.
gg Related Links
• "Changing the Color Mode" p.68
• "Available Color Modes" p.68
• "Setting Auto Iris" p.68
Changing the Color Mode
You can change the projector's Color Mode using the remote control to
optimize the image for your viewing environment.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Color Mode] button on the remote control to change the
Color Mode.
The name of the Color Mode appears briefly on the screen and then
image appearance changes.
c
To cycle through all of the available color modes for your input signal,
press the [Color Mode] button repeatedly.
a
You can also set the Color Mode setting in the projector's Image
menu.
gg Related Links
• "Image Quality Settings - Image Menu" p.171
Available Color Modes
You can set the projector to use these color modes, depending on the input
source you are using:
Color mode Description
Presentation Best for color presentations and television images in a
bright room, with vivid images in sharp contrast.
Dynamic Best for projecting in a bright room. This is the
brightest mode.
Cinema Best for movies projected in a dark room with natural
tone images.
sRGB Best for still images projected in a bright room that
conform to the sRGB color standard.
Blackboard Best for presentations onto a green chalkboard
(adjusts the colors accordingly).
Setting Auto Iris
You can turn on Auto Iris to automatically optimize the image based on the
brightness of the content.
This setting is available for Dynamic or Cinema color modes.
a
Turn on the projector and switch to the image source you want to use.
To Next Page
Loading...
Need help?
General
