EtherScope™ Series II
Getting Started Guide
94
Client Top Talker
The Client Top Talker test identifies the device that is
consuming the most bandwidth.
1. Tap Client Top Talker.
The main pane identifies the device and shows you
the amount of bandwidth it is consuming. The
preview pane identifies the client (by name and
SSID) and reports the channel it is active on. You can
also view utilization and access point information for
the device.
2. Tap
to obtain more detailed information
about the device.
The Device Details screen is displayed. In the main
pane, you can view device-specific information (for
example, device type and security). In the preview
pane, you can follow a hyperlink to view its signal
strength, WLAN statistics, or Tx/Rx rate information.
You can also follow one the hyperlinks to run one of
the diagnostic tests.
Network Discovery
The Network Discovery test scans the wireless
environment and discovers all networks within range.
1. Tap Network Discovery.
The preview pane categorizes the number and types
of networks discovered:
Infrastructure (802.11a/b/g)
Adhoc
Bridge
IP Subnets
Within each category, EtherScope Network Assistant
reports the number of devices it discovered.
To Next Page
Loading...
Need help?
General
