Fluke etherscope II User Manual

EtherScope™ Series II
Getting Started Guide
104
Wireless Problem Settings
The Wireless Problems screen enables you to change the
threshold setting for a problem and select which
problems are reported.
Note
The threshold setting specifies a value above or
below which a monitored class of events is
considered a problem. If the instrument detects
a value above or below the setting you specify,
it responds by entering the problem into the
Problem Log.
To set problem thresholds:
1. Tap the Wireless Problems hyperlink to display the
Wireless Instrument Settings—Wireless Problems
screen (Figure 30).
epi78s.bmp
Figure 30. Wireless Instrument Settings—Wireless
Problems Screen
This screen lists all of the wireless problems
EtherScope Network Assistant detects that have
configurable threshold values.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com

Fluke etherscope II Specifications

General

Brand	Fluke
Model	etherscope II
Category	Measuring Instruments
Language	English