Network Assistant
Before You Begin
25
Locating the External Interfaces
The following external interfaces are located on the
instrument’s right side panel:
• Serial DB-9: provides a network device connection via
a serial cable
• Headphone: enables quiet operation of the
instrument (for future applications)
• Microphone: (for future applications)
• USB port: connection for an accessory, such as a
keyboard or mouse
SLOT 2 is located on the top side panel. This interface
accepts a CompactFlash
®
(type 1 and 2) memory card.This
memory card enables you to store test data and
temporarily hold files that are transferred from a PC
during a software update.
Locating the External Power Connection
The DC power jack is located on the instrument’s right
side panel. Plug the supplied AC adapter into this jack to
provide external power to the EtherScope Network
Assistant and to charge the battery.
To Next Page
Loading...
Need help?
General
