Network Assistant
Monitoring and Troubleshooting a Wireless LAN
101
• Signal Strength: if necessary, drag the slider to
fine tune signal strength settings. The Offset is
only available if Show dBm is selected.
• Show dBm/Show Percent: select to specify how
you want signal strength displayed (in dBm or as
a percent) for test results.
• Active Bands: selects the frequency range that
you want the instrument to use.
• Transmit Settings: Enable Transmit (default)
allows the instrument to link to the SSID
specified on the Wireless Instrument Settings —
Wireless Security screen and perform active
discovery. If this feature is not checked, the
instrument performs passive discovery only.
3. Tap to save the changes.
Wireless Instrument Security Settings
Tap the Instrument Security hyperlink to display the
Instrument Security configuration screen (Figure 28):
epi76s.bmp
Figure 28. Wireless Instrument Settings—Instrument
Security Screen
To Next Page
Loading...
Need help?
General
