EtherScope™ Series II
Getting Started Guide
108
Running the Diagnostic Tests
EtherScope Network Assistant provides a set of
specialized tests that you can use to diagnose specific
network problems, such as connectivity and
performance, and to obtain critical information about
hosts, devices, and services on your network. These tests
include the following:
• Ping
• Trace Route
• Trace Switch Route (LAN only)
• Wireless Throughput (WLAN only)
• Locate (WLAN only)
• Link (WLAN only)
• Login Diagnosis (WLAN only)
• Signal Strength (WLAN only)
• WLAN Statistics (WLAN only)
• Tx/Rx Rate (WLAN only)
You can access the diagnostics tests in one of two ways:
Note
The list of available tests differs depending on
which method you use to access the tests.
• Tap
and select the desired test from the drop-
down list.
OR
• Select a device. Then, tap
.
If the diagnostic test is available, it appears as a blue
hyperlink in the preview pane. Tap the name of the
diagnostic test to access it.
To Next Page
Loading...
Need help?
General
