i
Preface
Thank you for purchasing our FRENIC-Lift series of inverters.
FRENIC-Lift is an inverter designed to drive a three-phase induction motor (hereafter called an induction motor)
and a three-phase permanent magnet synchronous motor (hereafter called a synchronous motor) for exclusively
controlling elevating machinery.
Improper handling might result in incorrect operation, a short life, or even a failure of this product as well as the
motor.
To drive a synchronous motor, a PG interface card option involving a pulse encoder is needed. For derails, refer
to the instruction manual of PG Interface Card.
Listed below are the other materials related to the use of the FRENIC-Lift. Read them in conjunction with this
manual as necessary.
• Multi-function Keypad "TP-G1-CLS" Instruction Manual (INR-SI47-1092-E)
• FRENIC-Lift Reference Manual (INR-SI47-1068-E)
• About compliance with standards (INR-SI47-1148-E)
The materials are subject to change without notice. Be sure to obtain the latest editions for use.
Safety precautions
Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or maintenance
and inspection. Ensure you have sound knowledge of the device and familiarize yourself with all safety infor-
mation and precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in death or serious bodily injuries.
Failure to heed the information indicated by this symbol may lead to
dangerous conditions, possibly resulting in minor or light bodily injuries
and/or substantial property damage.
Failure to heed the information contained under the CAUTION title can also result in serious consequences.
These safety precautions are of utmost importance and must be observed at all times.
Application
• FRENIC-Lift is equipment designed to drive induction motors and synchronous motors for exclusively
controlling elevating machinery. Do not use it for single-phase motors or for other purposes.
Fire or accident could occur.
• FRENIC-Lift may not be used for a life-support system or other purposes directly related to the human
safety.
• Though FRENIC-Lift is manufactured under strict quality control, install safety devices for applications
where serious accidents or material losses are foreseen in relation to the failure of it.
An accident could occur.
To Next Page
Loading...
Need help?
General
