6 Troubleshooting
86
Troubleshooting
6
4 Insert the Tray 2 into the machine, and push
until it stops.
Important •Do not use excessive force on the tray. Doing
so could damage the tray or the inside of the
machine.
Paper Jams in Fusing Unit
The following describes how to clear paper jams occurring in the fusing unit.
Important •Ensure nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt,
or oil from your hands on the film of the belt unit may reduce print quality.
• Protect the drums of the drum cartridges against bright light. If the rear cover remains open for
more than 3 minutes, print quality may deteriorate.
1 Open the Tray 5 (bypass) and remove the
remaining paper on the tray.
2 Grasp both sides of the Tray 5 (bypass), and
then pull the tray from the machine.
3 Pull out the Tray 1 halfway from the machine
until it stops.
To Next Page
Loading...
Need help?
General
