130 Troubleshooting
Adjusting Color Registration
This section describes how to adjust the color registration when you first install the printer or after moving it to a new
location.
Performing Auto Correct
Auto Correct allows you to correct the color registration automatically.
Using the Printer Setting Utility
The following procedure uses Windows 7 as an example.
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4 Deselect the check box next to On.
5 Click Start next to Auto Correct.
The color registration is corrected automatically.
Printing the Color Registration Chart
Using the Printer Setting Utility
The following procedure uses Windows 7 as an example.
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4 Deselect the check box next to On.
5 Click Start next to Print Color Regi Chart.
The color registration chart is printed.
To Next Page
Loading...
Need help?
General
