Fuji Xerox DocuPrint CP116 w User Manual

34 Printer Connection and Software Installation
Setting the IP Address (for IPv4 Mode)
NOTE:
• To set an IP address for IPv6 in Dual Stack mode, use the CentreWare Internet Services. For more information, refer to the
online Help on the CentreWare Internet Services. To display the CentreWare Internet Services in an IPv6 network, use a link
local address. The printer's link local address is listed in the System Settings page. For details, see "Printing a System
Settings Page" on page 95.
 Printer's TCP/IP and IP Addresses
If your computer is on a large network, contact your network administrator for the appropriate TCP/IP addresses and
additional system settings information.
If you are creating your own small local area network or connecting the printer directly to your computer using
network, follow the procedure for automatically setting the printer's IP address.
Computers and printers primarily use TCP/IP protocols to communicate over a network. With TCP/IP protocols,
each printer and computer must have a unique IP address. It is important that the addresses are similar, but not the
same; only the last digit needs to be different. For example, your printer can have the address 192.0.2.1 while your
computer has the address 192.0.2.2. Another device can have the address 192.0.2.3.
Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server automatically
programs an IP address into every computer and printer on the network that is configured to use DHCP. A DHCP
server is built into most cable and Digital Subscriber Line (DSL) routers. If you use a cable or DSL router, see your
router's documentation for information on IP addressing.
 Dynamic Methods of Setting the Printer's IP Address
The DHCP and AutoIP protocols are available for dynamically setting the printer's IP address. They are enabled by
default in your printer.
You can turn on/off both protocols using the Printer Setting Utility or CentreWare Internet Services.
NOTE:
• You can print a report that includes the printer's IP address. For more information, refer to "Printing a System Settings Page"
on page 95.
Using the Printer Setting Utility
The following procedure uses Windows 7 as an example.
1 Click Start  All Programs  Fuji Xerox  Fuji Xerox Printer Software for Asia-Pacific  your printer 
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
The TCP/IP Settings page is displayed.
4 In the IP Address Mode field under IPv4 Settings, select the DHCP/AutoIP option.
5 Click Apply New Settings.
6 Click Restart printer to apply new settings to take effect.

Fuji Xerox DocuPrint CP116 w Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CP116 w
Category	Printer
Language	English