132 Troubleshooting
Entering Values
Using the Printer Setting Utility
Enter the values that you found in the color registration chart to make adjustments.
The following procedure uses Windows 7 as an example.
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
• The window to select a printer appears in this step when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility opens.
2 Click the Printer Maintenance tab.
3 Select Registration Adjustment from the list at the left side of the page.
The Registration Adjustment page is displayed.
4 Deselect the check box next to On.
5 Select the value you checked in the color registration chart, and then click Apply New Settings.
6 Click Start next to Print Color Regi Chart.
The color registration chart is printed with the new values.
7 Adjust until all straight lines are at the value of 0.
Viewing the images before and after will help.
IMPORTANT:
• After printing the color registration chart, do not turn off the printer until the printer motor has stopped running.
To Next Page
Loading...
Need help?
General
