EasyManuals Logo
Home>Fuji Xerox>Printer>DocuPrint CP116 w

Fuji Xerox DocuPrint CP116 w User Manual

Fuji Xerox DocuPrint CP116 w
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Basic Operation 19
Power Saver Mode
The printer has a power saving feature which reduces power consumption during periods of inactivity. This feature
operates in two modes: the low power mode and sleep mode. As delivered, the printer switches to the low power
mode five minutes after the last print job is finished. The printer then switches to the sleep mode after another six
minutes of inactivity. When the printer is in the low power mode, all operator panel indicators except for the
(Power Saver) indicator and the indicator announcing that a problem occurs go out. In the sleep mode, all
operator panel indicators except for the (Power Saver) indicator go out.
The factory default settings of five minutes (Low Power Timer) and six minutes (Sleep Timer) are changeable within
the range of 5 to 30 minutes (Low Power Timer) and 1 to 6 minutes (Sleep Timer). The printer returns to the ready-to-
print state in about 28 seconds when re-activated.
Setting the Time of the Power Saver Mode
You can specify the time of the power saver mode. The printer switches to the power saver mode after the specified
time.
The following procedure uses Microsoft
®
Windows
®
7 as an example.
1 Click Start All Programs Fuji Xerox Fuji Xerox Printer Software for Asia-Pacific your printer
Printer Setting Utility.
NOTE:
The window to select a printer appears in this step, when multiple print drivers are installed on your computer. In this
case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2 Click the Printer Maintenance tab.
3 Select System Settings from the list at the left side of the page.
The System Settings page is displayed.
4 Specify the time for Low Power Timer and Sleep Timer of Power Saver Timer.
5 Click Apply New Settings to take effect.
Exiting the Power Saver Mode
The printer automatically exits the power saver mode when it receives a print job from a computer. To manually exit
the power saver mode, press (Stop) button on the operator panel.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CP116 w and is the answer not in the manual?

Fuji Xerox DocuPrint CP116 w Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CP116 w
CategoryPrinter
LanguageEnglish

Related product manuals