5 Tools
124
Tools
5
îš„ Off
Does not print a report regardless of whether data transmission is successfully completed or
not.
îš„ On
Automatically prints a Transmission Report when data is sent successfully and a
Transmission Report - Job Undelivered when data transmission failed.
îš„ Print when delivery fails
Prints a Transmission Report - Job Undelivered when the data transmission failed.
Scan File Transfer Report (Fax Server)
Set whether or not to print a Transmission Report after scanned data is sent using the Server
Fax feature.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
îš„ Off
Does not print a report regardless of the completion of the data transmission.
îš„ On
Automatically prints a Transmission Report for a successful transmission and a Transmission
Report (undelivered) for a transmission failure.
îš„ Print when delivery fails
Prints a Transmission Report (undelivered) for a transmission failure.
2 Sided Report
Select whether or not to print a report on one side of the paper or both sides when printing
a report/list.
Activity Report - Recipient
Select how the information on recipients is shown when printing an Activity Report: the first
40 characters or the last 40 characters.
Job Flow Error Report (ApeosPort Series Models Only)
Select whether or not to automatically print a Job Flow Error Report.
Maintenance
You can initialize or delete data from the hard disk of the machine.
EP Diagnostic Request/Repair Request
When the EP system via the Internet is used, the machine contacts our Customer Support
Center if a check or maintenance is required. Our service representative visits your place as
required.
Note • The EP system is not available in some region. For more information, contact our Customer Support
Center.
For more information on the EP system, refer to "EP System" (P.598).
To Next Page
Loading...
Need help?
General
