EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuPrint M465 AP

Fuji Xerox DocuPrint M465 AP Administrator's Guide

Fuji Xerox DocuPrint M465 AP
611 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #372 background imageLoading...
Page #372 background image
14 Problem Solving
372
Problem Solving
14
Trouble during Copying
This section describes how to resolve copy problems.
Unable to Copy
If you cannot copy a document, identify the symptom in the following table to perform the
remedy.
Symptom Cause Remedy
The document is
not correctly fed
from the
document feeder.
The document is too small. The minimum size of document that can be
loaded on the document feeder is 5.5 x 5.5
mm (A5 ).
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document type is
unsuitable.
The document feeder does not feed irregular
sized documents, business cards,
transparencies, or thin documents.
In addition, the document feeder does not
feed documents with sticky tags, paper clips,
or adhesive tape.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
The document guides are set
in incorrect positions.
Adjust the document guides to the
document.
Refer to "3 Copy" > "Copying Procedure" in the User
Guide.
A piece of torn paper remains
in the document feeder.
Open the document feeder cover, and
remove the piece.
Refer to "Document Jams" (P.496).
Documents of mixed sizes are
loaded.
The machine cannot copy original of
different sizes at a time.

Table of Contents

Other manuals for Fuji Xerox DocuPrint M465 AP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint M465 AP and is the answer not in the manual?

Fuji Xerox DocuPrint M465 AP Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint M465 AP
CategoryAll in One Printer
LanguageEnglish

Related product manuals