Connectivity & Network Setup
147
Tools
5
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the Connectivity &
Network feature.
For information on Connectivity and Network Settings, refer to "Printer Environment Settings" (P.265) or "E-mail
Environment Settings" (P.275).
If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer to "CentreWare
Internet Services Settings" (P.257).
The following shows the reference section for each setting.
Port Settings..................................................................................................................................................................................147
Protocol Settings ..........................................................................................................................................................................152
Machine's E-mail Address/Host Name ...................................................................................................................................155
Proxy Server Settings...................................................................................................................................................................156
EP Proxy Server Setup..................................................................................................................................................................157
Outgoing/Incoming E-mail Settings........................................................................................................................................158
Remote Authentication/Directory Service..............................................................................................................................160
Security Settings...........................................................................................................................................................................165
Other Settings ...............................................................................................................................................................................169
1
On the [Tools] screen, select [System Settings] > [Connectivity & Network Setup].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.92).
2
Select an item to set or change.
Port Settings
Set the interface of the machine connected to a client. In [Port Settings], you can configure
the following settings.
Important • For LPD, Port9100, and HTTP-SSL/TLS do not use a number that is the same as a port number of
another port.
For a port that uses HTTP (IPP, Internet Service (HTTP), UPnP Discovery, SOAP, WebDAV, and Web
Services on Devices (WSD)), do not use a number that is the same as a port number of LPD,
Port9100, and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below, operation may
no longer be performed properly depending on the setting conditions of the port:
25, 139, 427, 445, 631, 15000
For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.165).
You can configure the Google Cloud Print port settings in CentreWare Internet Services. For more information, refer to the
help of CentreWare Internet Services.
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
connect to the Internet. The communication fee shall be borne by you.
USB
îš„ Port Status
Select [Enabled] to use a USB interface.
To Next Page
Loading...
Need help?
General
