15 Appendix
564
Appendix
15
îš„ About View Image Generation
It may take time for generating view images depending on the type of document. If you
want to speed up the printing process or there is no need for displaying view images, you
can disable the image generation setting of the print driver.
Note • The print driver settings have priority over the machine settings.
Notes and Restrictions on the Use of the Copy Feature
îš„ Copy Feature
The machine does not offer the Improves Fit feature.
îš„ Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to the
Services Home screen, and then select a service. In that case, the settings specified in either
service are cleared.
îš„ ID Card Copy
z
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
z
When the reduced size is specified to copy an ID card, the machine may copy the ID card
in a different orientation from the original orientation depending on the magnification
ratio specified.
Notes and Restrictions on the Use of the Print Feature
îš„ PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript driver.
With the Pages per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages up, and with
or without frame borders.
îš„ Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB and
the job includes application data with graphic data (EPS file including binary data) pasted,
the machine may misidentify the binary data as protocol data; therefore, the output of text
data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] > [System
Settings] > [Connectivity & Network Setup] > [Port Settings] > [USB] to properly print data
which includes EPS files with binary data.
îš„ ContentsBridge
With ContentsBridge, you can print PDF, TIFF, JPEG, and XPS data by drag and drop. To print
DocuWorks documents, however, DocuWorks Viewer Light (free distribution) or DocuWorks
6.0 or later (sold separately) is required. PDF and TIFF print data will be transferred to the
machine directly, whereas DocuWorks document data will be first processed by the client
computer, and then transferred to the machine and printed.
Note • XPS stands for XML Paper Specification.
îš„ Text for Media Print
You can use a commercially available single-slot memory card reader, but the operation is
not guaranteed.
To Next Page
Loading...
Need help?
General
