Working w ith the notebook
Removing and installing the removeable dust filter
In order to ensure opt imum cooling of the components in your notebook, you
should periodically clean the dust filter of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results w ith a sma ll hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the dust filter
when the device is switched on.
► Prepare for removal, s
ee chapter "
Prep aring to remo ve components" , Page 62.
1
2
► Press and hold the lock of the dust filter
(1) and remove it from its slot (2).
► Clean the dust cham
ber.
1
► Insert the dust filter into the s lot (1) at
an angle as shown, and ensure that
you fee l it click into place.
► Complete the removal, see chapter
"
Finishing component removal", Page 64.
Fujitsu 39
To Next Page
Loading...
Need help?
General