Fujitsu ScanSnap S1300 User Manual

Using the ScanSnap in Various Ways (for Windows users)
152
■ Scanning Long Pages
Documents up to 863 mm (34 in.) in length can be scanned.
The following explains how to scan long pages.
1. Load the document in the ScanSnap.
For details about document types that can be loaded, refer to "Paper Sizes of
Documents" (page 26).
z Long page documents should be loaded one sheet at a time in the ADF paper chute
(cover).
z Take note of the following when scanning long page documents:
Loading
Hold the sheet with your hands to prevent it from falling
off the ADF paper chute (cover).
Removing
Make sure that there is enough
space where the sheet exits the
ScanSnap, and pick up the ejected
sheet with your hands so that it
does not fall off the unit where you
placed the ScanSnap.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g