Fujitsu ScanSnap S1300 User Manual

Using the ScanSnap in Various Ways (for Windows users)
142
■ Removing Blank Pages from the Scanned Image Data
The ScanSnap is able to recognize and remove blank pages automatically from the scanned
image data. When you scan documents in Duplex mode with this function enabled, both sides
of the documents are scanned regardless of whether anything is printed on the back side or
not. When a blank side is scanned, it is recognized as "blank" and the image data is
automatically removed.
To remove blank pages, change the settings by following the procedure below.
1. Select [Scan Button Settings] from the Right-Click Menu.
Refer to "Right-Click Menu" (page 41) for more information about the Right-Click Menu.
D The ScanSnap setup dialog box appears.
2. Click the [Option] button in the [Scanning] tab.
D The [Read mode option] dialog box appears.
z The following types of documents may be recognized as blank pages:
- Almost blank documents with only a few characters
- Documents of only one color (including black) and without any patterns, lines, or
characters
When you scan such documents, clear the [Allow automatic blank page removal] check box.
Also make sure to check the image data for accidentally removed pages when discarding the
scanned document.
z Blank pages are not removed when CardMinder is used.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g