Fujitsu ScanSnap S1300 User Manual

Parts and Functions
18
Parts and Functions
This section explains names and functions of the ScanSnap parts.
■ Front
ADF paper chute (cover)
Open the cover to use the ScanSnap.
D Opening the cover turns on the ScanSnap.
Extension
Pull this part up when scanning long documents.
Side guide
Adjust the side guides to the width of documents to
prevent scanned images from getting skewed.
ADF release tab
Pull the ADF release tab towards you to open the
ADF top section.
[Scan] button
Press this button to start scanning.
It indicates the power status of the ScanSnap as
follows:
Blue (lit) : Ready
Blue (flashing) : Scanning
Orange (flashing) : Error
ADF paper chute (cover)
You can load the documents here after opening it.
ADF top section
(ADF: Automatic Document Feeder)
Open the cover to remove jammed documents,
replace pad assy and pick roller, and clean the inside
of the ScanSnap.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g