Fujitsu ScanSnap S1300 User Manual

Setting the ScanSnap (for Mac OS users)
194
■ Automatic Linkage with Applications
Cardiris automatically links with ScanSnap Manager upon startup.
When you scan business cards by pressing the [Scan] button when Cardiris is active (when
the menu is Cardiris), ScanSnap Manager automatically links with Cardiris, in which the
scanned card image is displayed.
Even when the ScanSnap is in Quick Menu mode, ScanSnap Manager automatically links
with Cardiris in which the scanned card image is displayed without the Quick Menu appearing
after scanning.
The interaction between Cardiris and ScanSnap Manager ends once Cardiris is no longer
active.
Business cards are scanned with the current scan settings except when the following is set in
the [Scanning] tab:
- Image quality: Auto

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g