Fujitsu ScanSnap S1300 User Manual

Part Numbers and Replacement Cycle of Consumables
287
Part Numbers and Replacement Cycle of
Consumables
The following table lists the part numbers and the standard replacement cycle of
consumables:
Note that the suggested replacement cycles are guidelines when using A4/Letter wood-free
paper (80 g/m
2
[20.0lb]) as the cycle varies according to the paper type used.
Use only consumables specified by PFU LIMITED.
To obtain these parts, contact your FUJITSU dealer or an authorized FUJITSU scanner
service provider.
No. Part Name Part No. Standard Replacement Cycle
1 PAD ASSY PA03541-0002 10,000 sheets or every year
2 PICK ROLLER PA03541-0001 100,000 sheets or every year

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g