Fujitsu ScanSnap S1300 User Manual

Clearing Paper Jams
267
Clearing Paper Jams
If a paper jam occurs during scanning, follow the procedure below to remove the jammed
document.
CAUTION
z Open the ADF top section and remove the jammed document smoothly.
z Be careful not to touch any sharp parts when removing the jammed document.
Doing so may result in injuries.
z Be careful not to get your accessories (ties, necklaces etc.) or hair caught inside the
ScanSnap when removing jammed documents.
z Be careful of burns as the surface of the scan glass gets hot when the ScanSnap is used.
1. Remove the document from the ADF paper chute (cover).
2. Pull the ADF release tab to open the ADF top section.
Clean the inside of the ScanSnap by following the guidelines in "Cleaning the Inside of the
ScanSnap" (page 283).
ADF paper
chute (cover)
ADF release tab
ADF top section

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g