Fujitsu ScanSnap S1300 User Manual

About Actions (for Mac OS users)
213
■ Using the ScanSnap as a Copy Machine
This section explains how to print scanned image data with a printer.
You can use the ScanSnap as a copy machine by printing scanned image data directly with a
printer.
z By default, the printer set as [Default Printer] in the Mac OS is used. You may change the
settings and select another printer after scanning.
z Depending on the document condition and scan settings, the scanned image to be printed
may have shadows (appearing as lines) on its edges.
z To print out the image data of a document that has no margins, save the image data to file
first, and then print it by using Preview, Adobe Acrobat or Adobe Reader.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g