GE eBike Service Manual

2018112-003 Rev J eBike, eBike L, eBike EL - 103 -
Appendix C: Technical Specifications
Appendix C.1: Technical Specifications eBike Basic / eBike Comfort
Ergometer Model: modular ergometer system eBike ,
models eBike basic, eBike comfort
operating mode: continuous operation
power: 100 - 240 V / 50 - 60 Hz
power consumption: 60 VA max.
fuses: 2 x 1.25 A (slow-blow)
braking principle: computer-controlled eddy-current brake with torque measurement; speed
(RPM)-independent to DIN VDE 0750-0238
load range: 6 . . . 999 Watt, speed (RPM)-independent
RPM range: 30 . . . 130 n/min
deviation of load to DIN VDE 0750-0238: +/- 5% max. between 25 and 400 Watts
but +/- 3 W max. between 25 and 100 Watts
acc. to manufacturer: +/- 5% max. between 20 and 999 Watts
but +/- 3 W max. between 6 and 100 Watts
load levels: manual change by 1, 5, 10 or 25 W or multiples thereof through protocol
implemented protocols:
with control terminal PC: exercise tests: 5 fixed protocols (WHO, Hollmann and others)
10 user-programmable protocols
manual load control
with control terminal PCplus: exercise tests: 5 fixed protocols (WHO, Hollmann and others)
10 user-programmable protocols
manual load control
permitted patient weight: 150 kg
saddle height adjustment: continuous for heights between 120 cm and 210 cm
digital indication of saddle height
eBike basic: manual adjustment of saddle height
eBike comfort: software-controlled electrical adjustment of saddle height
adjustment of the handlebar: for heights between 120 cm and 210 cm
eBike basic: rigid steering column, continuous, full-circle (360°) handlebar adjustment
eBike comfort: height adjustment of steering column, continuous, full-circle (360°) handlebar
adjustment
displays: LCD as well as LED as an additional speed (RPM) indication
with control terminal PC: LCD: 68 x 34 mm and 128 x 64 pixel, respectively
with control terminal PCplus: LCD: 115 x 88 mm and 320 x 240 pixel, respectively
interfaces: PORT 1: RS232 with remote start, 9-pin Sub-D
PORT 2: RS232, 9-pin Sub-D, for service purposes only
PORT 3: RS232, 5-pin DIN socket
ANALOG: analog input/output for nominal load, 8-pin DIN socket
remote start EKG unit (starting pulse for EKG unit); 1 to 30 seconds before
load change
weight:
eBike basic: approx. 61 kg
eBike comfort: approx. 69 kg
dimensions (W x L): 460 x 900 mm, width of handlebar: approx. 575 mm
height: minimum: approx. 900 mm; maximum: approx. 1350 mm
calibration: software-controlled via keyboard / PC with standard calibration weight of 8 kg
calibration protection: code

GE eBike Specifications

General

Brand	GE
Model	eBike
Category	Medical Equipment
Language	English