2018112-003 Rev J eBike, eBike L, eBike EL - 49 -
D: Service Menu
Part D: Service Menu for eBike Basic / Comfort / L / EL
Note: The service menus are the same for both the Control Terminal PC and the Control Termi-
nal PCplus. The menus shown below are from Control Terminal PC.
The Service Menu is only available in English.
Default Settings of Ergometer eBike
eBike PC / PCplus
Settings Menu
Default Mode menu
Protocols see Operator’s Manual
Contrast at optimum
Load change +/- 5W
Language German
Beep On
Software Version n/a
Date / Time current values
EKG Type Digital (Code 003)
RPM Min: 54, Max: 65
Pulse Display Off
Service Menu (Code 999)
Baudrate 4.800 Baud
Load Calibration n/a
Analog Comparison n/a (20W=0.20V, 300W =3.0V
ECG-Startpulse Leadtime: 10 sec
Pulsewidth: 100 msec
NIBP Parameter Leadtime: 60 sec
Resting NIBP: ON
Software Update n/a
Error Codes n/a
PC-Mode Automatic Yes
Saddle Calibration n/a
NIBP Calibration n/a
NIBP Test n/a
Ergometer Type ER900
Note: To exit the Service Menu, switch off the eBike.
To Next Page
Loading...
Need help?
General
