GE EST iO64 User Manual

Chapter 1: System operation
30 EST iO64 and iO500 Technical Reference Manual
Restoring a device
Once a device is manually activated, it can be manually restored.
Restoring a device turns off its output, such as turning off a strobe
or horn.
Reports
Test
Control
Program
⇩
Enter Password
0000
⇩
Control
Enable/Disable
Activate/Restore
⇩
Activate/Restore
Device
Panel NAC
⇩
Device
Loop 01<>
⇩
To restore a device:
1. Press the Menu button on the front panel.
2. Choose Control.
3. Enter your password (the minimum of a level one password is
required).
4. Choose Activate/Restore.
5. Choose Device.
6. Choose the loop the device is on.
Note: If your panel only has one loop, the loop selection screen
does not display. Go to the next step.
7. Enter the device ID for the device that you want to restore.
8. Press Enter.
9. Press Cancel to return to the previous menu.
— or —
Press the Menu button to exit menu mode.
Device Restore<>
001
Device 001

GE EST iO64 Specifications

General

Brand	GE
Model	EST iO64
Category	Control Panel
Language	English