Chapter 3: Programming
EST iO64 and iO500 Technical Reference Manual 87
Factory default settings
The panel comes from the factory with default settings. You can use
the default settings or you can configure the panel by changing
settings as needed through programming.
Note: Depending on panel equipment and programming, some of
these settings may not be visible or available.
Panel operation options
Language: English
Marketplace: US
AC fail delay: 3 hours
Zone resound: On
Reset inhibit: Off
Auto signal silence: Off
Day start: 06:00
Night start: 18:00
Date format
U.S.: MM/DD/YYYY
Aux power reset: On
LCD banner: Blank
Event notification: Device
Key #1: Disabled
Key #2: Disabled
Other panel options
Daylight savings
Enabled: No
Month start: 03
Month end: 11
Week start: 1
Week end: 0
Weekday start: 0
Weekday end: 0
Hour start: 02
Hour end: 02
Offset minutes: 60
RS232 CU Enable: Off
Lock remote read: No
To Next Page
Loading...
Need help?
General
