Revision B MAC™ 5000 resting ECG analysis system 5-21
2024917-010
Troubleshooting: Frequently Asked Questions
Battery Capacity
Q: What is the capacity of the battery?
A: We recommend that the MAC 5000 be plugged into a wall outlet
whenever it is not in use. However, the life of the battery is
approximately 100 ECGs and one-page reports or six hours of
continuous operation (without printing).
System Setup
Location Number
Q: When entering in the patient data, how do I get the Location field to
automatically populate with the same number?
A: The Location number can be set in System Setup to save you from
entering it for each test.
Go to System Setup.
Select Basic System.
Select Miscellaneous Setup.
Arrow down to Location and type in the number you want set as
your default. Then press Enter.
Press the esc key until you return to System Setup.
Select Save Setup.
Select To System.
You can select Main Menu to exit System Setup.
Patient Questions
Q: How do I change what questions I see when I am entering the patient
data?
A: The patient questions you see on the Patient Data window when
starting a test were set up in System Setup.
Go to System Setup.
Select Basic System.
Select Patient Questions.
Select the patient questions you want to include when entering
the patient data for a test.
Press the esc key until you return to System Setup.
Select Save Setup.
Select To System.
You can select Main Menu to exit System Setup.
To Next Page
Loading...
Need help?
General
