3-4 MAC™ 5000 resting ECG analysis system Revision B
2024917-010
Installation: Preparation for Use
Trolley Height Adjustment
The optional MAC 5000 Trolley can be assembled for one of two heights,
92.07 cm (36.25 inches) or 84.45 cm (33.25 inches). The trolley is
normally shipped at the 92.07 cm (36.25 inches) height but can be
changed to fit your needs. To change to the lower height, use the
following steps:
1. Tip the trolley on its side and using a 1/2-inch socket, remove the
4 outer 1/2-inch bolts and slide the base assemble up on the column.
2. Remove the remaining bolts and mounting plate.
3. Flip the mounting plate and reverse the procedure.
14A
15A
To Next Page
Loading...
Need help?
General
