3-8 MAC™ 5000 resting ECG analysis system Revision B
2024917-010
Installation: Preparation for Use
Installing the External Modem Kit
The modem and its mounting bracket comes assembled and ready to
install on the trolley. To install a modem kit on the trolley, complete the
following steps:
1. Find the modem mounting site located under the Acquisition Module
support arm at the rear of the trolley where the kit is to be installed.
2. Slide the assembly up in place so that the bracket slot catches on the
bracket lip.
3. Tighten the three mounting screws to secure the modem to the
trolley.
24A, 25
26A
29A