Login and Security
The Login screen displays.
2. Enter your username and password.
• If you are an LDAP user, enter the domain name and username if the
default domain name is not configured, or if your user profile belongs to an
LDAP server domain that is not the default domain. For example, Domain
\Username.
• To verify that you typed the correct password, select Show to view the
password.
• Contact your administrator to reset your password. Log on to the device using
the new password. Change the password immediately for security reasons.
• If you are the Admin user and forgot your password, perform a system
reset to reset the password to the default password admin123. For more
information, see Perform System Reset on page 27.
3. Select Log In.
• If the login credentials are correct, you are successfully logged on to the
device. Your username displays on the upper-right corner of all of the screens
you have access.
• If your login fails, see the following table:
Table 9: Login Errors
Symptom Cause Solution
You entered your username or
password incorrectly.
Re-enter your correct username
and password again.
You are a local user and you
forgot your password
Contact your administrator to
reset your password, then log on
to the device again.
If you are an LDAP user, the error
is caused by:
• No connection to the LDAP
server. Your username
cannot be authenticated
against cached LDAP user
credentials.
• Wait for the connection
to the LDAP server to be
restored and log on to the
device again.
• You do not belong to any
groups authorized access to
this device.
• Contact your LDAP
administrator to assign your
user profile to an LDAP group
authorized for this device and
log on to the device again.
The username
or password is
incorrect.
• Your current password has
expired.
• Contact your LDAP
administrator to change your
password.
2088531-370-2 MAC VU360
™
Resting ECG Analysis System 23
To Next Page
Loading...
Need help?
General
