GE MAC VU360 User Manual

Recording an ECG or Rhythm
If Then
Patient information is incomplete in the
patient report (for example, mandatory fields
are blank or contain invalid data), a message
displays in the notification area indicating
that the patient report cannot be transmitted
because of incomplete patient data.
NOTE:
Based on the Mandatory fields apply for
Transmission settings, the ECG report
is not added to the transmission queue
until you enter the patient demographic
data for the mandatory fields. An error
message displays in the notification area.
You need to complete the data for the
mandatory fields and manually resend
the report to a configured destination.
NOTE:
Based on the Mandatory fields apply
for Acquisition settings, the ECG report
is not accepted, transmitted, or printed
until you enter the patient demographic
data for the mandatory fields. If you
manually transmit ECG report, an
error message Unable to transmit.
Incomplete patient data. displays on
the Acquisition screen. You need to
complete the data for the mandatory
fields to transmit the ECG report.
Perform the steps below:
1. Edit the patient report to enter missing
patient data.
2. Retry transmission.
Print a Patient Report
You can print a copy of a Rhythm, Full Disclosure, or ECG patient report in any
configured report format for the selected lead set.
• An ECG patient report opens in the ECG tab.
• A Rhythm report opens in the Rhythm tab.
• A Full Disclosure report opens in the FD Report tab.
1. Before printing a copy of the report, review the patient report and verify:
• The patient information in the patient report is correct.
• The ECG or Rhythm or Full Disclosure ECG is acquired with the desired gain
and filter.
2. Perform one of the following steps:
2088531-370-2  MAC VU360
™
Resting ECG Analysis System 63

GE MAC VU360 Specifications

General

Brand	GE
Model	MAC VU360
Category	Measuring Instruments
Language	English