Login and Security
Symptom Cause Solution
You are prompted
to change your
password.
You are a local or Admin user and
your password has expired.
Perform the procedure Change
the User Password on page 25
and log on to the device again.
Log On the Device as a STAT User
If user authentication STAT is set to Enable, a STAT user can log on the device to get a
patient ECG in an emergency.
1. On the Login screen, select STAT.
The Acquisition screen opens.
2. You can get an ECG or other tasks the administrator has given to the STAT user
role.
Access the Device using a Technician ID
Make sure that you enable the user authentication.
1. On the Login screen, enter a valid Technician ID to populate the Technician ID
field.
2. Select Continue.
You are logged on as the Default User. The Acquisition screen displays. You can
perform tasks with Default User or Technician ID assigned privileges.
Log Out of the Device
Log out of your user session when you are done using the device. You must enable
User authentication.
1. Complete pending tasks, for example, acquire an ECG or save configuration
settings, before you log off from your user session.
2. Perform one of these steps to log off of the device:
• Press the Power button on the keyboard.
The Power Options dialog box opens. Select Log Out.
• From the User Menu on the Acquisition screen, select Log Out to log off the
device.
If you log off before a task is completed, a message displays that you will lose
incomplete data.
24 MAC VU360
™
Resting ECG Analysis System 2088531-370-2
To Next Page
Loading...
Need help?
General
