Work with the Files List
Transmit a Stored Patient Report to a Configured
Destination
• Make sure that you have the privilege to transmit patient reports to a configured
destination.
• Select the correct destination for your patient report.
Patient Report
Type
Destination Supported File Format
Resting ECG DCP server destination (MUSE v8 SP3
or higher, v9, or MUSE NX and MUSE
DICOM Gateway Pro SP1 or higher)
Hilltop format
Resting ECG USB R/W flash drive PDF, Hilltop and Sapphire XML
(Sapphire XML format is available if
you enable the XML format output
in the Option Manager) formats.
Resting ECG SFTP server destination with remote
directory path
PDF, Hilltop and Sapphire XML
(Sapphire XML format is available if
you enable the XML format output
in the Option Manager) formats.
Resting ECG Shared directory destination with
folder path
PDF, Hilltop and Sapphire XML
(Sapphire XML format is available if
you enable the XML format output
in the Option Manager) formats.
Digital Rhythm USB R/W flash drive PDF format
Digital Rhythm DCP server destination (MUSE v9
SP6 or higher, or MUSE NX and MUSE
DICOM Gateway Pro SP6 or higher)
PDF format
Digital Rhythm SFTP server destination with remote
directory path
PDF format
Digital Rhythm Shared directory destination with
folder path
PDF format
Full Disclosure USB R/W flash drive PDF format
Full Disclosure DCP server destination (MUSE v9
SP6 or higher, or MUSE NX and MUSE
DICOM Gateway Pro SP6 or higher)
PDF format
Full Disclosure SFTP server destination with remote
directory path
PDF format
Full Disclosure Shared directory destination with
folder path
PDF format
To transmit a patient report to the default or configured destination, perform the
steps below:
2088531-370-2 MAC VU360
™
Resting ECG Analysis System 89
To Next Page
Loading...
Need help?
General
